The Musical Instrument Digital Interface (MIDI) protocol provides a standardized and efficient means of conveying musical performance information as electronic data. MIDI information is transmitted in "MIDI messages", which can be thought of as instructions which tell a music synthesizer how to play a piece of music. The synthesizer receiving the MIDI data must generate the actual sounds. The MIDI 1.0 Detailed Specification provides a complete description of the MIDI protocol.
The MIDI data stream is a unidirectional asynchronous bit stream at 31.25 Kbits/sec. with 10 bits transmitted per byte (a start bit, 8 data bits, and one stop bit). The MIDI interface on a MIDI instrument will generally include three different MIDI connectors, labeled IN, OUT, and THRU. The MIDI data stream is usually originated by a MIDI controller, such as a musical instrument keyboard, or by a MIDI sequencer. A MIDI controller is a device which is played as an instrument, and it translates the performance into a MIDI data stream in real time (as it is played). A MIDI sequencer is a device which allows MIDI data sequences to be captured, stored, edited, combined, and replayed. The MIDI data output from a MIDI controller or sequencer is transmitted via the devices' MIDI OUT connector.
The recipient of this MIDI data stream is commonly a MIDI sound generator or sound module, which will receive MIDI messages at its MIDI IN connector, and respond to these messages by playing sounds. Figure 1 shows a simple MIDI system, consisting of a MIDI keyboard controller and a MIDI sound module. Note that many MIDI keyboard instruments include both the keyboard controller and the MIDI sound module functions within the same unit. In these units, there is an internal link between the keyboard and the sound module which may be enabled or disabled by setting the "local control" function of the instrument to ON or OFF respectively.
The single physical MIDI Channel is divided into 16 logical channels by the inclusion of a 4 bit Channel number within many of the MIDI messages. A musical instrument keyboard can generally be set to transmit on any one of the sixteen MIDI channels. A MIDI sound source, or sound module, can be set to receive on specific MIDI Channel(s). In the system depicted in Figure 1, the sound module would have to be set to receive the Channel which the keyboard controller is transmitting on in order to play sounds.